This is an old revision of the document!
IoT Gateway.
Here are instructions how to configure Conduit to use LoRa Network Server provided by The Things Network.
LoRa Network Server Configuration:
LoRa Configuration
{ "SX1301_conf": { "radio_0": { "enable": true, "freq": 867500000 }, "radio_1": { "enable": true, "freq": 868500000 }, "chan_multiSF_0": { "enable": true, "radio": 1, "if": -400000 }, "chan_multiSF_1": { "enable": true, "radio": 1, "if": -200000 }, "chan_multiSF_2": { "enable": true, "radio": 1, "if": 0 }, "chan_multiSF_3": { "enable": true, "radio": 0, "if": -400000 }, "chan_multiSF_4": { "enable": true, "radio": 0, "if": -200000 }, "chan_multiSF_5": { "enable": true, "radio": 0, "if": 0 }, "chan_multiSF_6": { "enable": true, "radio": 0, "if": 200000 }, "chan_multiSF_7": { "enable": true, "radio": 0, "if": 400000 }, "chan_Lora_std": { "enable": true, "radio": 1, "if": -200000, "bandwidth": 250000, "spread_factor": 7 }, "chan_FSK": { "enable": true, "radio": 1, "if": 300000, "datarate": 50000, "freq_deviation": 25000 } }, "gateway_conf" : { "forward_crc_disabled" : true, "forward_crc_error" : false, "forward_crc_valid" : true, "gateway_ID" : "AABBCCDDEEFF1122", <-- change to comply with your hardware "keepalive_interval" : 12, "push_timeout_ms" : 120, "serv_port_down" : 1700, "serv_port_up" : 1700, "server_address" : "router.eu.thethings.network", <-- Select according to your region "stat_interval" : 20, "synch_word" : 52 } }
MTAC LoRa extension module for Conduit. Gateway ID (NODE) is printed in the label of the module.